{"id":3677,"date":"2020-05-19T02:53:46","date_gmt":"2020-05-19T07:53:46","guid":{"rendered":"https:\/\/roboticpoolcleanerscompared.com\/?p=3677"},"modified":"2020-05-29T09:25:27","modified_gmt":"2020-05-29T14:25:27","slug":"how-to-clear-cloudy-swimming-pool","status":"publish","type":"post","link":"https:\/\/roboticpoolcleanerscompared.com\/blog\/how-to-clear-cloudy-swimming-pool\/","title":{"rendered":"How to Clear Cloudy Swimming Pool Water: 3 Simple & Proven Tricks"},"content":{"rendered":"

\u201cCloudy\u201d is a pretty vague term, and there are various stages of cloudy pool water. Also, it goes from bad to worse.<\/p>\n

It can be broken down into three classes:<\/p>\n

Flat.<\/strong>\u00a0The least severe kind, in that your pool water, yet has its color, but it does not have the sparkle it once did.<\/p>\n

Hazy.<\/strong>\u00a0The water is beginning to lose the color it, and it is now hard to make out details on the pool floor.<\/p>\n

Milky.\u00a0<\/strong>The water is translucent, meaning that the pool floor isn\u2019t visible. This is quite as bad as it gets.<\/p>\n

\n

What Causes Cloudy Pool Water?<\/strong><\/h2>\n

\"Cloudy<\/p>\n

There are several reasons<\/a> your pool water can become cloudy, and understanding that the potential cause will not only help you mend it but also prevent it in the future.<\/strong><\/p>\n

So let\u2019s talk about methods to fix the root of the issue before treating the symptoms \u2014 since we\u2019re not about to slap on a bandaid and call it a day.<\/p>\n

Here we go.<\/p>\n

Cause #1: Improper Pool Chemicals<\/strong><\/h3>\n

If you did not pay attention to your school chemistry lessons, it might be a chemical imbalance in the water. (In actual, this is one of the most frequent causes of a cloudy pool )<\/p>\n

Having too much quantity of one chemical or not sufficient of another is the fast-track ticket to a muddy pool, so assessing your pool chemistry for high pH, total alkalinity and chlorine levels is always a fantastic place to start.<\/p>\n

Is Your pH Level Right?<\/strong><\/h4>\n

The optimal pH level<\/a> for your pool water is around 7.2 and 7.6 on the pH scale, which leads to being a little bit alkaline.<\/strong><\/p>\n

Your water won\u2019t turn muddy only\u00a0because<\/em>\u00a0your pH level is out of the range, but it is going to stop your pool chemicals from doing their job correctly, causing particles to linger that will eventually result in a cloudy pool.<\/p>\n

Measuring the pH level of your pool is straightforward using the right test kit, so ensure that you do that weekly to remain on top of any sudden changes.<\/p>\n

Is Your Chlorine Level Accurate?<\/strong><\/h4>\n

You want chlorine in your pool to fight off nasty bacteria and other germs, but the amount you use should not be overlooked.<\/p>\n

The \u201csweet spot\u201d is within 1 and 3 ppm (parts per million). This keeps your water clean but prevents it from turning cloudy \u2014 considering everything else is balanced.<\/strong><\/p>\n

Exactly just how much depends on how frequently your pool is used, how busy it gets, and the weather it is exposed to. (The sun will \u201cprocess\u201d your chlorine, converting it into gasoline and making your chlorine level to drop quicker.)<\/p>\n

Is Your Alkalinity Level Too High?<\/strong><\/h4>\n

Alkalinity, or Total Alkalinity, is a pH buffer that absorbs changes in the water to keep your pH level stable. However, it may cause your water to turn cloudy if your alkalinity is high.<\/p>\n

Once again, most pool test kits will enable you to test for alkalinity, and you will typically need this to be between 80 and 120 parts per million (ppm), or 100 and 140 parts per million for vinyl, painted, and fiberglass inground pools.<\/p>\n

You can use dry acid (sodium bisulfate) or muriatic acid (hydrochloric acid) to lower alkalinity though fatty acid has some undesirable side effects.<\/p>\n

Is Your Calcium Hardness Too High?<\/strong><\/h4>\n

Magnesium hardness is a measure of how much calcium is in the water, with the suggested range being somewhere within 200 ppm to 400 ppm.<\/p>\n

While low calcium hardness levels can lead to damage to your pool fittings, it is the opposite side of the spectrum you want to be concerned with here. High levels of calcium hardness result in excess calcium, which ultimately results in scaling and cloudy water.<\/strong><\/p>\n

Unfortunately, most test strips will not contain calcium hardness, so you will want to use a liquid test kit instead.<\/p>\n

If you notice that your calcium hardness level is too high, the best option is to replace some of your pool water. If you are unable to do that, you can use pool flocculant to remove the extra calcium, but it will need a manual clean-up afterward.<\/p>\n

Cause #2: Circulation & Filtration Issues<\/strong><\/h3>\n

Pool water that is not being well circulated is always had the possibility of becoming cloudy.<\/p>\n

That\u2019s because circulation accelerates your pool water through your filter system, so without it, the filter can\u2019t work it\u2019s magic and maintain your water squeaky clean.<\/strong><\/p>\n

There are a few moving components to this, so let\u2019s go through them.<\/p>\n

Is Your Pump Strong Enough?<\/strong><\/h4>\n

A pool pump is a core element of your filtration system as it cycles your water through the filter to eliminate debris and keep circulation. This blocks the water from stagnating, which eventually causes other difficulties.<\/p>\n

Keeping that in mind, you will have to ensure that your pump can cycle the intact contents of your pool at least once each day. What\u2019s more, you will require a pump that can perform a turnover in 8 hours.<\/p>\n

The speed at which a pump finishes a turnover relies on two factors:<\/strong><\/p>\n

    \n
  1. The volume of water in your pool (utilize this calculator)<\/li>\n
  2. The flow-rate of the pump itself (this is mentioned in the product specifications of any pool pump)<\/li>\n<\/ol>\n

    To accurately size your pump, divide your water volume by 8, then divide it again by 60. What you are left with is your pools needed turnover rate in GPM. The flow-rate of your swimming pool pump should be at least the same.<\/p>\n

    Is Your Pump Suited For Your Filter?<\/strong><\/h4>\n

    You wouldn\u2019t put all that effort into accurately sizing your pool pump only to ignore your pool filter, would you?<\/p>\n

    If your pump is too reliable for your filter, it is going to end up pushing more water than the filter can manage.<\/strong> This bottleneck not only keeps the water from being properly cleaned, but it can also cause physical harm to your filtration system.<\/p>\n

    Pool filters share a comparable rating system to pool pumps since they\u2019re rated in gallons per minute (GPM) per square foot. Your filter should have the same rating as to your swimming pool pump.<\/p>\n

    Do You Properly Maintain Your Equipment?<\/strong><\/h4>\n

    This is one of those \u201cduh!\u201d suggestions that people skim over, but you would be amazed by how often primary pool care is overlooked.<\/p>\n

    Your pool gear is the first line of defense, so ensuring it runs effectively should be on top of your list. That includes identifying and regular cleaning, remove blockages, and timely part-replacements.<\/p>\n

    Cause #3: Environmental Effects<\/strong><\/h3>\n

    If your cloudy pool doesn\u2019t have anything to do with the filter system or the chemicals, then the only reasonable explanation it\u2019s being caused by the surrounding atmosphere.<\/p>\n

    Yep, Mother Nature can be a real b*tch often. Here are some of the possible environmental causes:<\/p>\n

    Leaves & Small Debris<\/strong><\/h4>\n

    While leaves will be simple enough to remove before they make your water dirty, it\u2019s the buildup of small dust and particles that can create a problem for you.<\/p>\n

    Small Animals & Insects<\/strong><\/h4>\n

    Insects and Creatures will find their way to your pool eventually. However, the main thing to keep an eye out for is droppings, especially bird poop.<\/p>\n

    The Dreaded Algae<\/strong><\/h4>\n

    Insects and Creatures will find their way to your pool eventually. However, the main thing to keep an eye out for is droppings, especially bird poop.<\/p>\n

    Surface Runoff<\/strong><\/h4>\n

    Heavy rain can lead to water to collect on the floor, in some cases making it\u2019s way to your pool bringing tons of other nasties with it (depending upon your pool type and installation ).<\/p>\n

    \n

    How To Clear A Cloudy Pool<\/strong><\/h2>\n
    \"Solar

    Skimmer<\/p><\/div>\n

    Now that we have looked at (and hopefully identified) the possible cause for your cloudy pool water let us talk about clearing this up.<\/p>\n

    There are multiple ways to clear cloudy pool water, so, in the usual Poolonomics style, let\u2019s classified them down one-by-one.<\/p>\n

    Method #1: Utilizing Swimming Pool Clarifier<\/strong><\/h3>\n

    A pool clarifier<\/a> is a chemical that is used to clean up your pool water.<\/p>\n

    How do they make it?<\/strong><\/h4>\n

    Well, it works through a procedure known as \u201ccoagulation,\u201d and it is not as complicated as it seems.<\/p>\n

    Cloudy pool water is a buildup of small particles, and your filter can have a hard time catching those because of their size \u2014 but that\u2019s why coagulation is beneficial.<\/p>\n

    Coagulation helps your filter by clumping those tiny particles together, making them much easier to lift which will clear a cloudy pool.<\/p>\n

    Method #2: Using Pool Flocculant<\/strong><\/h3>\n

    When it is about pool chemistry, pool flocculant operates similarly to pool clarifier in that it clumps those annoying particles together to make them simple to eliminate, except it does have one distinct difference.<\/p>\n

    Rather than work with your filter to ultimately eliminate the particle clumps, flocculant takes them to the base of your pool, where they\u2019ll require to be removed via vacuuming.<\/p>\n

    There are a few important things to note about this procedure:<\/strong><\/p>\n